Fats, oils and grease (FOG) from a commercial kitchen do not stay liquid for long once they cool in a drain. They coat the pipe wall, catch food waste and, left alone, can block the kitchen run, a yard gully or a section of sewer. Water companies across the UK have documented the result in public sewers — the so-called fatberg — but the same process starts much closer to the pot-wash, the fryer and the floor gully.

Blockage Busters provides grease-trap and FOG services for restaurants, takeaways, cafés, canteens, hotels, care kitchens and other food premises: inspection, emptying and cleaning of grease separators where we can reach them, and cleaning or jetting of the kitchen drainage when FOG has already left the trap. Call 07379 424891 with the premises postcode and a short description of the problem, or use the contact form. We will discuss availability, access and a quote before any work is agreed. Tell us if the kitchen cannot stop during service, so we can discuss a suitable time.

If a kitchen drain is overflowing now, treat it as urgent. Call Blockage Busters on 07379 424891 for emergency drainage help, subject to engineer availability, or use our emergency drainage service and our commercial drainage pages.

We offer 24/7 call-outs. No fix, no fee applies to agreed drain unblocking only: if we cannot complete that unblocking, you will not be charged for that work. CCTV surveys, mapping, repairs, lining, planned jetting and grease-trap work are quoted separately.

We use specialist equipment to clear grease and FOG from grease traps and commercial kitchen drains.

Why FOG is a particular problem in food premises

A domestic kitchen produces grease; a commercial kitchen produces it in volume, at higher temperature, and often with starch, proteins and cleaning chemicals in the same waste stream. As the mixture cools in a pipe or a chamber, FOG solidifies and narrows the bore. Symptoms include a slow pot-wash, a gurgling floor gully, a smell in a yard chamber, wastewater backing up at a wash-hand basin, or a blockage that returns a few days after a clearance.

The problem is not only inconvenience. A blocked kitchen drain can close a wash-up during service, create a hygiene issue, and, if FOG leaves the premises and contributes to a sewer blockage, draw the attention of the sewerage undertaker. Prevention — a correctly sized, correctly connected grease separator that is actually emptied — is almost always cheaper than a closure and a reactive call-out.

What Building Regulations say

This is guidance, not a design service or a legal determination. For England, Approved Document H (Drainage and waste disposal), paragraph 2.21 of the 2015 edition, states that drainage serving kitchens in commercial hot-food premises should be fitted with a grease separator complying with BS EN 1825-1:2004 and designed in accordance with BS EN 1825-2:2002, or other effective means of grease removal. The approved document supports Part H of the Building Regulations 2010. It applies to building work; existing premises may have older arrangements, undersized units, or no separator at all.

“Other effective means” is a real category: some kitchens use different grease-management equipment, and landlords or water companies may have their own requirements. We can inspect what is actually installed, discuss whether it is being maintained, and quote for emptying, cleaning or drainage work. We will not certify that a unit complies with BS EN 1825. Compliance questions should be referred to the installer, a specialist designer, or building control.

What a visit usually involves

Tell us the type of premises, when the kitchen operates, where the grease trap or interceptor sits (inside a pot-wash, in a yard, below ground), and whether you already have emptying records. Access and the unit’s location affect both the method and how long the kitchen may need to pause a waste line.

A typical visit, agreed in advance, may include:

Waste removed from a grease separator is not ordinary household rubbish. Ask us how that waste will be handled and what record you will receive.

A trap that is never emptied, that has been bypassed, or that is connected so that the pot-wash misses it entirely, will not protect the drain. If we can see a connection or installation problem, we will say so and discuss whether a repair or a change to the arrangement should be quoted separately. We do not design commercial kitchens.

Under-sink traps, yard interceptors and what we need to see

“Grease trap” is used for more than one kind of unit. Some kitchens have a compact under-sink or in-line separator next to the pot-wash; others have a larger below-ground interceptor in a yard, sometimes serving several appliances. The two are emptied in different ways and have different access needs. Tell us which you have — a photograph taken safely, with the lid closed, is often enough for a first conversation — and whether more than one kitchen or a dishwash line is connected.

A unit can be present and still fail in practice: a missing or damaged baffle, a lid that does not seal, a pipe that has been connected downstream of the trap so that the greasiest waste bypasses it, or a chamber so full that incoming waste crosses straight over the top of the grease layer. Those are findings we can describe on the day. They are also why a planned empty that nobody checks against the actual fill-level can drift into being too late.

If FOG is already in the downstream drain, clearing the trap alone may not restore every fitting. That is the point at which kitchen-drain jetting and, where useful, a camera view of the accessible run should be discussed as a separate, quoted step, not assumed to be part of a standard empty.

Planned emptying versus a one-off clearance

A single emergency clean can restore flow. It does not change how much FOG the kitchen produces next week. Many food businesses therefore empty traps on a planned cycle, adjusted to how busy the kitchen is and to the size of the unit. We can discuss a planned arrangement for a single site or for several sites under the same operator or managing agent.

Good kitchen practice still matters: scraping plates, collecting used frying oil in a dedicated container for licensed collection, and keeping floor-gully strainers clear all reduce the load on the separator. They do not replace emptying.

We offer 24/7 call-outs. No fix, no fee applies to agreed drain unblocking only: if we cannot complete that unblocking, you will not be charged for that work. CCTV surveys, mapping, repairs, lining, planned jetting and grease-trap work are quoted separately. If the problem is urgent, call Blockage Busters on 07379 424891 for emergency drainage help, subject to engineer availability.

Frequently asked questions

How often should a grease trap be emptied?

It depends on the size of the unit and how busy the kitchen is. A small takeaway in a peak week may need more frequent emptying than a larger unit in a quieter canteen. We will discuss a sensible interval after we have seen the trap and the waste it holds, rather than quoting a single figure for every premises.

Do I legally have to have a grease separator?

For new building work in commercial hot-food premises in England, Approved Document H paragraph 2.21 is the official guidance: a BS EN 1825 grease separator or other effective means of grease removal. Existing premises, leases and water-company or environmental-health expectations can add their own requirements. We can inspect what you have; we cannot give a legal ruling.

Can you come when the kitchen is closed?

Tell us your opening hours when you enquire so we can discuss a suitable visiting time. Evening or early-morning visits can be discussed where the work would otherwise interrupt service.

What happens to the waste?

Grease and sludge from a separator must be taken away and disposed of properly, with a record. Ask us how the waste will be handled and what paperwork you will receive.

The sewerage company has been in touch about FOG. Can you help?

Yes, in the sense that we can inspect the trap and the accessible kitchen drains, empty and clean where agreed, and provide a factual note of what was found and what was done. We cannot conduct the company’s investigation for them, and we cannot promise a particular outcome.

Do you cover my area?

Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties. Give the premises postcode so we can confirm coverage.

Related pages

DRAINAGE PROBLEM? GET THE RIGHT HELP

WE WON’T BE BEATEN ON PRICE! Ask us about comparable like-for-like quotes for drainage work.

Whether you are dealing with a blockage, slow drainage, recurring problems or damaged pipework, tell us what is happening. Blockage Busters can help with blocked sinks and toilets, drain unblocking and descaling, CCTV surveys, inspections and repairs for domestic and commercial properties.

TELL US WHAT’S HAPPENING

Send us a few details about the problem and the service you require.