You have already used a plunger. The water did not go, or it went and the fitting blocked again the same day, or the attempt made a mess. This page is what that failed attempt is telling you, and what not to do next. It is not a tutorial on how to plunge — the site’s blocked-toilet and blocked-sink guides already discuss when plunging is sensible — and it is not a rewrite of should I use a chemical drain cleaner. The useful moment is the one after you have stopped.
Call 07379 424891 with your postcode, which fitting you plunged, and whether any cleaner was poured in before or after, or use the contact form. Blockage Busters offers 24/7 call-outs from our Enfield base. We offer a one hour response once we have confirmed we can attend. We offer 24/7 call-outs. No fix, no fee applies to agreed drain unblocking only: if we cannot complete that unblocking, you will not be charged for that work. CCTV surveys, mapping, repairs, lining, planned jetting and grease-trap work are quoted separately. A second, more violent plunge is not the next step.
What a failed plunge often means — and what it does not
A plunger can move a close, soft obstruction in a pan trap or a basin waste when there is a seal, room in the bowl, and no chemical sitting in the water. When it does nothing, the restriction is often further along the pipe than the plunger can influence, or it is a mass — fat, wipes, a dropped object — that will not move as a plug. A toilet plunger that will not seal on a sink, or a small sink cup on a toilet outlet, can also fail for a simple mechanical reason. None of that, on its own, proves a collapse. Collapse is a condition we would discuss from what a camera can see, not from a plunger that did not work.
If the water went down after plunging and the same fitting failed again by the evening, treat that as recurrence, not as proof that one more session will finish it. If several fittings are involved, or a shower backs up when you flush, stop plunging any one of them: you may be pushing wastewater into another opening.
Do not follow a failed plunge with a chemical cleaner. If the plunge has not moved the obstruction, the product sits in the fitting, and the next attempt — yours or ours — can splash it. If you already combined the two, tell us before we attend, and keep the packaging. Do not add boiling water, a wire coat hanger, a drain “stick” of unknown material, or a homemade rod. Those scratch a pan, break a seal, or push an object to a worse place. Do not take a toilet pan off to “get at it”. If the pan is already overflowing, a plunger should not have been the first tool; see what to do when the toilet overflows.
What we do instead, and what to have ready
We will look at the fitting you have been working on and, where a camera can pass, at the accessible drain, using the latest drain cameras and the latest drainage equipment. We use specialist equipment for wipes and for grease where that is what we find. We will describe what we see, including any limit on what a plunger could have reached. We will not criticise you for having tried a reasonable first attempt; we do need an honest account of it, because it changes how we approach the water in the pan.
If the same blockage returns, a survey of the accessible run is often the appropriate next step. We send survey results over within 2–3 days. A survey is not covered by the no-fix, no-fee promise. If the camera shows a displaced joint, roots or a defect that needs a repair, we will say so and quote that work separately. If excavation is later agreed, Blockage Busters carries out full reinstatement — we put everything back afterwards.
Give us the postcode, the fitting, what you tried, and whether a cleaner is in the water. If you are a tenant, tell us who is instructing us. In a flat, do not plunge a fitting that is backing up from a stack as a way of testing the neighbours. We will not publish a price list. We will not ask you to lift a manhole yourself. The drain unblocking service page sets out how a professional clearance is approached in general; this page is only the moment after a plunger has already been tried.
If the fitting you plunged is a kitchen sink that also serves a dishwasher or a waste disposal unit, say so: a plunge at the sink can send water back toward an appliance, and the other way around. Stop both until the waste has been dealt with. A gully in the yard is not a good place for a household plunger; the cup rarely seals, and wastewater can splash. Leave an outside opening and call, and see blocked outside drain if that is the fitting. In a rental, a tenant who has already tried a plunger is still entitled to a clear instruction from the landlord about who is authorising a visit; we will not take sides. If a previous plunge cracked a pan, loosened a soil-pipe joint or left water behind a bath panel, tell us before we attend — that is part of the condition, not a reason to hide the attempt.
Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties, and Peterborough and its surrounding towns. Give your postcode when you enquire so we can confirm we can attend the property.
Frequently asked questions
I plunged and the water went down, but it blocked again this evening.
Treat that as a recurrence, not as a reason to plunge harder. The restriction may be further along than a plunger can finish, or material may still be sitting in the run. Leave the fitting unused, and call with the times and what you tried. A camera is often useful if the same failure returns under ordinary use.
I already poured a chemical cleaner in, then plunged. Can you still come?
Tell us before we attend, and keep the packaging. A product sitting in a fitting is a splash hazard, and we need to know. Do not add more. See our page on chemical drain cleaners. We can still discuss a visit; the honest account is what makes that visit safer.
Does a failed plunge mean the pipe is collapsed?
No, not on its own. A plunger can fail because the restriction is further along, because of the material, or because the cup did not seal. Collapse is something we would discuss from what a camera can see, not from a plunge that did not work.
What if you cannot clear it?
No fix, no fee applies to agreed drain unblocking only: if we cannot complete that unblocking, you will not be charged for that work. CCTV surveys, mapping, repairs, lining, planned jetting and grease-trap work are quoted separately. A survey is not covered by that promise.
Do you cover my area?
Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties, and Peterborough and its surrounding towns. Give your postcode when you enquire so we can confirm coverage.
Related pages
- Should I use a chemical drain cleaner?
- What to do when the toilet overflows
- Toilet keeps blocking
- Blocked toilets: causes and first steps
- Drain unblocking service
- Dishwasher and kitchen sink blocked