A slow drain is not the same as a drain that will not run at all. Water still leaves the sink, the shower or the gully, but it takes longer than it used to, it sits in the tray, or it clears only if you run a trickle. That pattern is worth taking seriously. A gradual restriction often means a coating — fat, soap, limescale or silt — that will become a full blockage if it is left, or a partial collapse that still lets a little flow past. It can also be something simpler: a hair-bound plug, a badly fitted bottle trap, or a fitting that is almost unused.
This page is about diagnosing the pattern, not about naming a cause from a description. Blockage Busters inspects accessible fittings and pipework, clears restrictions with the latest drainage equipment — including specialist equipment for grease where fat is involved — and, where it would actually help, surveys the accessible run with the latest drain cameras. Call 07379 424891, or use the contact form, with your postcode and which fittings are slow. We will discuss a quote before work is agreed. If the fitting has already overflowed, or sewage is coming back, treat it as urgent.
We offer 24/7 call-outs. No fix, no fee applies to agreed drain unblocking only: if we cannot complete that unblocking, you will not be charged for that work. CCTV surveys, mapping, repairs, lining, planned jetting and grease-trap work are quoted separately.
Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties. Give your postcode when you enquire so we can confirm we can attend your address.
We use the latest drainage equipment and the latest drain cameras, and specialist equipment for grease and for wet wipes.
One fitting, several fittings, or only when it rains
The most useful first question is how widespread the slowness is. If a single basin is slow and the bath, the kitchen and the outside gully are fine, the restriction is often in that fitting’s trap or its first length of waste — a hair, a soap collar, a collapsing flexible waste, or a trap that was never put back correctly after a DIY change. Those are usually a smaller job, and they are not a reason, on their own, to survey the underground drain.
If several fittings on the same stack or the same side of the house are all slow, or if an upstairs shower backs up when a downstairs sink is used, the restriction is more likely further along a shared run. A CCTV inspection of the accessible drain, using the latest drain cameras, is often the way to see whether the cause is debris, grease, scale, a displaced joint or a partial collapse. Gurgling and slowness often travel together, but they are not the same symptom, and neither is a diagnosis on its own.
If the drain is only slow after heavy rain, the question is different again: a silted gully, a surface-water run that cannot take the load, or a combined system that is surcharged. See a drainage contractor and, if several properties are affected, the sewerage undertaker. A kitchen drain that is slow every evening, rain or not, is unlikely to be a rainfall problem.
What usually causes a gradual slow-down
Kitchen wastes collect fat, starch and coffee grounds as a coating that narrows the pipe from the wall inwards. A plunger may punch a hole through the middle and give a day’s improvement; it does not remove the coating. Clearing that properly uses specialist equipment for grease, and is more useful than a bottle of chemical cleaner, which can sit in a trap and damage some materials without solving the restriction.
In hard-water areas, limescale builds in similar layers, especially on slightly rough or already damaged pipe. We offer limescale cleaning on accessible runs; we will say if the scale is a coating we can treat, or a symptom of a pipe that is already failing.
Soap, toothpaste and hair in a bathroom, and wipes that have not quite formed a full blockage, produce a different, fibrous restriction. Wet-wipe material is cleared with specialist equipment for wet wipes. Outside, silt, leaves and grit in a gully or a shallow run do the same job more slowly, and a yard that has been “just about all right” for two winters can fail in the third.
A drain can also be slow because of a defect: a belly (a dip where water stands), a displaced joint, roots beginning to occupy the bore, or a pipe that is starting to lose its shape. Those will not be cured by a clean alone. The camera is what distinguishes a coating from a defect, which is why a recurring slow drain is worth inspecting, not only clearing.
What you can reasonably try, and when to stop
On a single basin or a bath, a careful removal of the trap — a bowl underneath, a photograph of how it came apart — and a clean of the hair and soap is a reasonable first step. Do not pour boiling fat, and be cautious with caustic cleaners, which are unpleasant to work around if we then have to open the same pipe. If the trap is clean and the fitting is still slow, or if more than one fitting is involved, it is time to call.
Do not keep a slow shower in use for weeks on the grounds that it “still goes”. Standing water in a tray is a slip and a hygiene problem, and the restriction is usually getting worse. We would rather discuss a quoted clearance than attend an overflow at midnight that started as a slow drain on Monday. That said, Blockage Busters offers 24/7 call-outs. when it does overflow.
After a clearance
A slow drain that has been properly cleaned should run in the ordinary way. If it does not, or if it slows again within days, say so — that is the point at which a camera view of the accessible run is usually justified, and at which repair, relining or, where needed, excavation may be discussed. If excavation is agreed, Blockage Busters carries out full reinstatement — we put everything back afterwards. We will quote that work separately. A clearance is not a promise that a defective pipe will behave itself.
Frequently asked questions
My kitchen sink is slow but the rest of the house is fine. Is that serious?
It is often a coating of fat in that waste, or a restriction in the trap, and it is worth clearing properly with specialist equipment for grease before it becomes a full blockage. If cleaning does not last, a camera inspection of the accessible run is the next step.
Can I use a chemical drain cleaner first?
We would rather you did not, particularly caustic products. They often sit in the trap, can damage some materials, and make a later visit less pleasant without removing a coating. A clean of the trap, or a professional clearance, is usually more effective.
Several fittings are slow, and sometimes we hear gurgling.
That pattern often sits further along a shared run. We can inspect the accessible drain with the latest drain cameras and discuss clearance or repair from what is actually found. Gurgling and slowness often travel together, but they are not a diagnosis on their own.
The drain is only slow after heavy rain.
That may be silt in a gully, a surface-water run at capacity, or a combined system under load. If several properties are affected, contact the sewerage undertaker as well. We can still inspect the accessible private drainage.
Do you come out of hours for a slow drain?
A slow drain that is still running is usually better dealt with in ordinary hours. If it has overflowed, or sewage is returning, Blockage Busters offers 24/7 call-outs. Work is backed by the company’s no-fix, no-fee promise.
Do you cover my area?
Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties. Give your postcode when you enquire so we can confirm coverage.
Related pages
- Gurgling drains
- Wet wipes and blocked drains
- Kitchen fat and blocked drains
- Blocked outside drain
- Washing machine drain blocked
- Drain flies