A washing machine that will not empty, that leaves standing water in the drum, or that throws an emptying error, is not always a failed pump. The machine’s own filter and hose are one possibility, and those are appliance-repair matters. The standpipe, the waste connection, a bottle trap, or the underground drain that also takes a kitchen or a utility sink, are another. Water appearing behind or under the machine, a slow utility sink, or a gurgle in a nearby basin when the machine discharges, are signs that the drainage may be involved.

Blockage Busters deals with the drain, not the appliance. We inspect accessible pipework with the latest drain cameras and can clear a restriction we can reach with the latest drainage equipment. Call 07379 424891 with your postcode and a short description — whether the kitchen sink is also slow, whether water is escaping, whether this is a house or a flat — or use the contact form. A survey is not a repair, so the no-fix, no-fee promise does not apply to the inspection itself. If a clearance is needed so the camera can pass, that work is quoted separately. That clearance is backed by the company’s no-fix, no-fee promise. If wastewater is overflowing, treat it as urgent. Blockage Busters offers 24/7 call-outs.

We use specialist equipment where grease or wet wipes are the obstruction, and the latest drain cameras to inspect afterwards.

Blockage Busters is based in Enfield, North London. We cover London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those counties. Give your postcode when you enquire so we can confirm we can attend the property.

The machine, the standpipe and the drain — three different places a fault can sit

Most domestic machines pump into a standpipe or a trapped waste, which then joins a branch. Lint, fibres, hair and detergent residue collect there, and in the run beyond. If the same branch also takes a kitchen sink, fat and grease mixed with lint is a poor combination, and a restriction further down can show first at the machine because the machine discharges a large volume in a short time. A utility-room wet wipe habit, or a sink used to rinse mop heads, will not help.

The pattern helps to place the fault. If only the machine fails, and the kitchen sink and every other fitting are normal, the restriction may be on the machine’s own branch — or in the appliance. If the sink is slow as well, or an outside gully surcharges when the machine empties, the problem is further along and a camera view of the accessible drain is the useful next step. We will not dismantle a washing machine we are not there to repair, and we will not tell you the appliance is fine without looking at the drain if the drain is why you called. An appliance engineer and a drainage contractor are sometimes both needed; we will say which part we can take.

Flats, stacked wastes and water behind the machine

In a flat, a machine on an upper floor may discharge into a branch on a soil stack. A restriction in that branch, or in the stack, can send water back to the machine or to a lower fitting. Tell us if neighbours have a similar problem, and who can authorise access to common parts. For the underground run, see who is responsible for your drain.

Water behind a kitchen unit or under a utility floor should not be ignored, even if the machine has stopped. If it is wastewater, keep people away and see our notes on sewage in the garden for the same precautions indoors: it is untreated waste. A smell at the machine when it is not running can be a dried or failed trap, a poor connection, or a drain that is backing up. We will describe what we can see.

Do not keep running cycles into a drain that is already overflowing. Do not pour a chemical cleaner into a machine or a standpipe as a substitute for inspection. We will not recommend a product of that kind.

What we do on the visit, and what happens if it keeps recurring

We work from the accessible waste and from any chamber that serves the run, and we will say how far we could inspect. Specialist equipment is used where grease or wipes are the obstruction, and the latest drain cameras to inspect the pipe afterwards. A clearance that lets the machine empty is sometimes the whole job. If the same waste fails again within weeks, or if the camera has shown a deformed length, a collapse or a belly of standing water, a quoted repair or relining is the honest conversation. If excavation is agreed, Blockage Busters carries out full reinstatement — we put everything back afterwards.

A machine in a garage or an outbuilding, with a long, shallow waste to the house drain, is a particular case: frost, a poor fall and lint can all play a part. Tell us if the run is external or if the problem started in cold weather. A shallow outside waste can freeze, and that is a different fault from a lint blockage. We will say what we can do on the drain side, and we will not claim a boiler or an appliance repair we are not there to carry out.

What to have ready

The postcode, whether other fittings are slow, whether water has escaped, the age of the installation if you know it, and any error the machine is showing, all help. If an appliance engineer has already attended and pointed at the drain, say so, and keep any note they left. We inspect accessible drainage and quote from what is found.

Frequently asked questions

Is this a job for an appliance engineer or a drainage contractor?

It can be either, or both. The machine’s pump and filter are appliance-repair matters. The standpipe, the waste and the underground drain are drainage. Tell us the pattern — whether other fittings are affected, whether water is escaping — and we will say what we can do on the drain side.

Only the washing machine is slow. The kitchen sink is fine.

The restriction may be on the machine’s own branch, or in the appliance itself. We can inspect the accessible waste and the drain it joins. We will not dismantle the machine.

Water is coming out behind the machine. Is that urgent?

Yes, if it is wastewater. Stop using the machine, keep people away, and treat it as an urgent drainage call. We offer 24/7 call-outs.

This keeps happening every few weeks.

A clearance restores flow. If the problem returns quickly, a camera inspection of the accessible drain is the way to see whether a defect — a deformed pipe, a collapse, standing water — is catching lint and grease again.

Do you cover my area?

Blockage Busters covers London, Hertfordshire, Essex, Bedfordshire, Buckinghamshire and Cambridgeshire, and the towns in those areas. Give your postcode when you enquire so we can confirm we can attend the property.

Related pages

DRAINAGE PROBLEM? GET THE RIGHT HELP

WE WON’T BE BEATEN ON PRICE! Ask us about comparable like-for-like quotes for drainage work.

Whether you are dealing with a blockage, slow drainage, recurring problems or damaged pipework, tell us what is happening. Blockage Busters can help with blocked sinks and toilets, drain unblocking and descaling, CCTV surveys, inspections and repairs for domestic and commercial properties.

TELL US WHAT’S HAPPENING

Send us a few details about the problem and the service you require.